Java javax.print.attribute.standard Class Finishings（JDK8）

136 阅读 0 评论 0 点赞

Java™ Platform
Standard Ed. 8

All Classes

Summary:
Nested |
Field |
Constr |
Method

Detail:
Field |
Constr |
Method

java.lang.Object
- javax.print.attribute.EnumSyntax
- - javax.print.attribute.standard.Finishings

All Implemented Interfaces:: Serializable, Cloneable, Attribute, DocAttribute, PrintJobAttribute, PrintRequestAttribute

public class Finishings
extends EnumSyntax
implements DocAttribute, PrintRequestAttribute, PrintJobAttribute

Class Finishings is a printing attribute class, an enumeration, that identifies whether the printer applies a finishing operation of some kind of binding to each copy of each printed document in the job. For multidoc print jobs (jobs with multiple documents), the MultipleDocumentHandling attribute determines what constitutes a "copy" for purposes of finishing.

Standard Finishings values are:

	`NONE`	`STAPLE`	`EDGE_STITCH`
	`BIND`	`SADDLE_STITCH`	`COVER`

The following Finishings values are more specific; they indicate a corner or an edge as if the document were a portrait document:

`STAPLE_TOP_LEFT`	`EDGE_STITCH_LEFT`	`STAPLE_DUAL_LEFT`
`STAPLE_BOTTOM_LEFT`	`EDGE_STITCH_TOP`	`STAPLE_DUAL_TOP`
`STAPLE_TOP_RIGHT`	`EDGE_STITCH_RIGHT`	`STAPLE_DUAL_RIGHT`
`STAPLE_BOTTOM_RIGHT`	`EDGE_STITCH_BOTTOM`	`STAPLE_DUAL_BOTTOM`

The STAPLE_XXX values are specified with respect to the document as if the document were a portrait document. If the document is actually a landscape or a reverse-landscape document, the client supplies the appropriate transformed value. For example, to position a staple in the upper left hand corner of a landscape document when held for reading, the client supplies the STAPLE_BOTTOM_LEFT value (since landscape is defined as a +90 degree rotation from portrait, i.e., anti-clockwise). On the other hand, to position a staple in the upper left hand corner of a reverse-landscape document when held for reading, the client supplies the STAPLE_TOP_RIGHT value (since reverse-landscape is defined as a -90 degree rotation from portrait, i.e., clockwise).

The angle (vertical, horizontal, angled) of each staple with respect to the document depends on the implementation which may in turn depend on the value of the attribute.

The effect of a Finishings attribute on a multidoc print job (a job with multiple documents) depends on whether all the docs have the same binding specified or whether different docs have different bindings specified, and on the (perhaps defaulted) value of the MultipleDocumentHandling attribute.

If all the docs have the same binding specified, then any value of MultipleDocumentHandling makes sense, and the printer's processing depends on the MultipleDocumentHandling value:
- SINGLE_DOCUMENT -- All the input docs will be bound together as one output document with the specified binding.
- SINGLE_DOCUMENT_NEW_SHEET -- All the input docs will be bound together as one output document with the specified binding, and the first impression of each input doc will always start on a new media sheet.
- SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- Each input doc will be bound separately with the specified binding.
- SEPARATE_DOCUMENTS_COLLATED_COPIES -- Each input doc will be bound separately with the specified binding.
If different docs have different bindings specified, then only two values of MultipleDocumentHandling make sense, and the printer reports an error when the job is submitted if any other value is specified:
- SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- Each input doc will be bound separately with its own specified binding.
- SEPARATE_DOCUMENTS_COLLATED_COPIES -- Each input doc will be bound separately with its own specified binding.

IPP Compatibility: Class Finishings encapsulates some of the IPP enum values that can be included in an IPP "finishings" attribute, which is a set of enums. The category name returned by getName() is the IPP attribute name. The enumeration's integer value is the IPP enum value. The toString() method returns the IPP string representation of the attribute value. In IPP Finishings is a multi-value attribute, this API currently allows only one binding to be specified.

See Also:: Serialized Form

Field Summary

Fields
Modifier and Type	Field and Description
`static Finishings`	`BIND` This value indicates that a binding is to be applied to the document; the type and placement of the binding is site-defined.
`static Finishings`	`COVER` This value is specified when it is desired to select a non-printed (or pre-printed) cover for the document.
`static Finishings`	`EDGE_STITCH` Bind the document(s) with one or more staples (wire stitches) along one edge.
`static Finishings`	`EDGE_STITCH_BOTTOM` Bind the document(s) with one or more staples (wire stitches) along the bottom edge.
`static Finishings`	`EDGE_STITCH_LEFT` Bind the document(s) with one or more staples (wire stitches) along the left edge.
`static Finishings`	`EDGE_STITCH_RIGHT` Bind the document(s) with one or more staples (wire stitches) along the right edge.
`static Finishings`	`EDGE_STITCH_TOP` Bind the document(s) with one or more staples (wire stitches) along the top edge.
`static Finishings`	`NONE` Perform no binding.
`static Finishings`	`SADDLE_STITCH` Bind the document(s) with one or more staples (wire stitches) along the middle fold.
`static Finishings`	`STAPLE` Bind the document(s) with one or more staples.
`static Finishings`	`STAPLE_BOTTOM_LEFT` Bind the document(s) with one or more staples in the bottom left corner.
`static Finishings`	`STAPLE_BOTTOM_RIGHT` Bind the document(s) with one or more staples in the bottom right corner.
`static Finishings`	`STAPLE_DUAL_BOTTOM` Bind the document(s) with two staples (wire stitches) along the bottom edge assuming a portrait document (see above).
`static Finishings`	`STAPLE_DUAL_LEFT` Bind the document(s) with two staples (wire stitches) along the left edge assuming a portrait document (see above).
`static Finishings`	`STAPLE_DUAL_RIGHT` Bind the document(s) with two staples (wire stitches) along the right edge assuming a portrait document (see above).
`static Finishings`	`STAPLE_DUAL_TOP` Bind the document(s) with two staples (wire stitches) along the top edge assuming a portrait document (see above).
`static Finishings`	`STAPLE_TOP_LEFT` Bind the document(s) with one or more staples in the top left corner.
`static Finishings`	`STAPLE_TOP_RIGHT` Bind the document(s) with one or more staples in the top right corner.

Constructor Summary

Constructors
Modifier	Constructor and Description
`protected`	`Finishings(int value)` Construct a new finishings binding enumeration value with the given integer value.

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`Class<? extends Attribute>`	`getCategory()` Get the printing attribute class which is to be used as the "category" for this printing attribute value.
`protected EnumSyntax[]`	`getEnumValueTable()` Returns the enumeration value table for class Finishings.
`String`	`getName()` Get the name of the category of which this attribute value is an instance.
`protected int`	`getOffset()` Returns the lowest integer value used by class Finishings.
`protected String[]`	`getStringTable()` Returns the string table for class Finishings.

Methods inherited from class javax.print.attribute.EnumSyntax
clone, getValue, hashCode, readResolve, toString

Methods inherited from class java.lang.Object
equals, finalize, getClass, notify, notifyAll, wait, wait, wait

- Field Detail
  - NONE
```
public static final Finishings NONE
```
    Perform no binding.
  - STAPLE
```
public static final Finishings STAPLE
```
    Bind the document(s) with one or more staples. The exact number and placement of the staples is site-defined.
  - COVER
```
public static final Finishings COVER
```
    This value is specified when it is desired to select a non-printed (or pre-printed) cover for the document. This does not supplant the specification of a printed cover (on cover stock medium) by the document itself.
  - BIND
```
public static final Finishings BIND
```
    This value indicates that a binding is to be applied to the document; the type and placement of the binding is site-defined.
  - SADDLE_STITCH
```
public static final Finishings SADDLE_STITCH
```
    Bind the document(s) with one or more staples (wire stitches) along the middle fold. The exact number and placement of the staples and the middle fold is implementation- and/or site-defined.
  - EDGE_STITCH
```
public static final Finishings EDGE_STITCH
```
    Bind the document(s) with one or more staples (wire stitches) along one edge. The exact number and placement of the staples is implementation- and/or site- defined.
  - STAPLE_TOP_LEFT
```
public static final Finishings STAPLE_TOP_LEFT
```
    Bind the document(s) with one or more staples in the top left corner.
  - STAPLE_BOTTOM_LEFT
```
public static final Finishings STAPLE_BOTTOM_LEFT
```
    Bind the document(s) with one or more staples in the bottom left corner.
  - STAPLE_TOP_RIGHT
```
public static final Finishings STAPLE_TOP_RIGHT
```
    Bind the document(s) with one or more staples in the top right corner.
  - STAPLE_BOTTOM_RIGHT
```
public static final Finishings STAPLE_BOTTOM_RIGHT
```
    Bind the document(s) with one or more staples in the bottom right corner.
  - EDGE_STITCH_LEFT
```
public static final Finishings EDGE_STITCH_LEFT
```
    Bind the document(s) with one or more staples (wire stitches) along the left edge. The exact number and placement of the staples is implementation- and/or site-defined.
  - EDGE_STITCH_TOP
```
public static final Finishings EDGE_STITCH_TOP
```
    Bind the document(s) with one or more staples (wire stitches) along the top edge. The exact number and placement of the staples is implementation- and/or site-defined.
  - EDGE_STITCH_RIGHT
```
public static final Finishings EDGE_STITCH_RIGHT
```
    Bind the document(s) with one or more staples (wire stitches) along the right edge. The exact number and placement of the staples is implementation- and/or site-defined.
  - EDGE_STITCH_BOTTOM
```
public static final Finishings EDGE_STITCH_BOTTOM
```
    Bind the document(s) with one or more staples (wire stitches) along the bottom edge. The exact number and placement of the staples is implementation- and/or site-defined.
  - STAPLE_DUAL_LEFT
```
public static final Finishings STAPLE_DUAL_LEFT
```
    Bind the document(s) with two staples (wire stitches) along the left edge assuming a portrait document (see above).
  - STAPLE_DUAL_TOP
```
public static final Finishings STAPLE_DUAL_TOP
```
    Bind the document(s) with two staples (wire stitches) along the top edge assuming a portrait document (see above).
  - STAPLE_DUAL_RIGHT
```
public static final Finishings STAPLE_DUAL_RIGHT
```
    Bind the document(s) with two staples (wire stitches) along the right edge assuming a portrait document (see above).
  - STAPLE_DUAL_BOTTOM
```
public static final Finishings STAPLE_DUAL_BOTTOM
```
    Bind the document(s) with two staples (wire stitches) along the bottom edge assuming a portrait document (see above).
- Constructor Detail
  - Finishings
```
protected Finishings(int value)
```
    Construct a new finishings binding enumeration value with the given integer value.
    
    Parameters:
    
    value - Integer value.
- Method Detail
  - getStringTable
```
protected String[] getStringTable()
```
    Returns the string table for class Finishings.
    
    Overrides:
    
    getStringTable in class EnumSyntax
    
    Returns:
    
    the string table
  - getEnumValueTable
```
protected EnumSyntax[] getEnumValueTable()
```
    Returns the enumeration value table for class Finishings.
    
    Overrides:
    
    getEnumValueTable in class EnumSyntax
    
    Returns:
    
    the value table
  - getOffset
```
protected int getOffset()
```
    Returns the lowest integer value used by class Finishings.
    
    Overrides:
    
    getOffset in class EnumSyntax
    
    Returns:
    
    the offset of the lowest enumeration value.
  - getCategory
```
public final Class<? extends Attribute> getCategory()
```
    Get the printing attribute class which is to be used as the "category" for this printing attribute value.
    For class Finishings and any vendor-defined subclasses, the category is class Finishings itself.
    
    Specified by:
    
    getCategory in interface Attribute
    
    Returns:
    
    Printing attribute class (category), an instance of class java.lang.Class.
  - getName
```
public final String getName()
```
    Get the name of the category of which this attribute value is an instance.
    For class Finishings and any vendor-defined subclasses, the category name is "finishings".
    
    Specified by:
    
    getName in interface Attribute
    
    Returns:
    
    Attribute category name.

Skip navigation links

Java™ Platform
Standard Ed. 8

All Classes

Summary:
Nested |
Field |
Constr |
Method

Detail:
Field |
Constr |
Method

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2022, Oracle and/or its affiliates. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.

Java javax.print.attribute.standard Class Finishings（JDK8）

Class Finishings

Field Summary

Constructor Summary

Method Summary

Methods inherited from class javax.print.attribute.EnumSyntax

Methods inherited from class java.lang.Object

Field Detail

NONE

STAPLE

COVER

BIND

SADDLE_STITCH

EDGE_STITCH

STAPLE_TOP_LEFT

STAPLE_BOTTOM_LEFT

STAPLE_TOP_RIGHT

STAPLE_BOTTOM_RIGHT

EDGE_STITCH_LEFT

EDGE_STITCH_TOP

EDGE_STITCH_RIGHT

EDGE_STITCH_BOTTOM

STAPLE_DUAL_LEFT

STAPLE_DUAL_TOP

STAPLE_DUAL_RIGHT

STAPLE_DUAL_BOTTOM

Constructor Detail

Finishings

Method Detail

getStringTable

getEnumValueTable

getOffset

getCategory

getName